Ready to pin down the truth about the Wolf Tooth Components Ripsaw Aluminum Pedals?
Let’s roll.
Feel that buzz when you unbox something you know is next-level? That’s the vibe you get with Ripsaw pedals.
Picture your feet settling onto a platform so slim it almost disappears under you, yet locks in like a magnet.
There’s some SERIOUS grip you can expect from these.
Whether you’re charging down a chattery trail, railing berms, or chasing a holeshot on the BMX track, the Ripsaws give you that uncanny feeling of connection.
It’s like they read your mind before you even shift your weight.
Crafted with surgical precision in Minnesota and sealed tight against grit and grime, they’re built for riders who demand epic grip without bulk.
Get ready for a ride that feels tuned specifically to your foot’s arch, with pins that cling but never claw.
Your next ride is about to feel sharper, smoother, and more in-charge than ever.
Wolf Tooth Ripsaw Aluminum Pedals Review
These pedals caught my eye the moment I saw that thin profile and those deep pins.
1. Key Features Of The Wolf Tooth Ripsaw Aluminum Pedals
Peel back the layers of its sleek design, and you’ll find a pedal that’s as thoughtful as it is tough.
Every angle, curve and pin placement was dialed in to give you an edge on the trail, track, or street.
- Slim, convex profile: The body is only 12.5 mm at its thickest. Front and rear edges taper to 7 mm. Your mid-foot lands right on the arch. (Shoes with little structure still lock in tight.)
- Large asymmetric platform: At 118 mm long and 102 mm wide, the platform holds your foot steady. You get support when pumping, pedaling or sprinting out of the saddle.
- Extra grip pins: Twelve stainless steel, rear-loading 4.5 mm pins on each side. Plus six spares in the box. Swap in shorter 3 mm pins to highlight the convex shape. Rust-proof and tough to strip.
- Rock-solid internals: Three sealed cartridge bearings. One Igus bushing with a custom radial seal. Keeps out dirt, mud and sand. A 17-4 stainless steel axle stands up to big impacts.
- Made in USA, CNC machining: Each pedal starts as a raw billet of 6061-T6 aluminum. Over 37 minutes of mill work, then anodize and assembly in Minnesota. You can trace each contour and tool path.
- Safety tested: Exceeds EN/ISO static and fatigue stress trials. Push, pull and twist tests. Built to survive hard landings and long hours on the pedals.
- Color options: Gold, Black, Raw Silver, Ultraviolet Purple, Orange, Espresso. Something to match your frame or crank.
- Five-year warranty: Wolf Tooth Components cover any defect in material or craft for five years. No fine print. (The Right to Repair guide helps you swap bearings or pins down the road.)
2. Wolf Tooth Ripsaw Aluminum Pedals Specifications
Ready for the nitty-gritty numbers that back up all that hype?
Let’s break down the specs that turn these pedals into a precision tool.
- Material – body: 6061-T6 aluminum
- Axle: 17-4 PH stainless steel
- Bearings & bushing: 3 sealed cartridge bearings + Igus ushing
- Platform size: 118 mm x 102 mm
- Profile thickness: 12.5 mm center; 7 mm front/rear edges
- Pin height: 4.5 mm (12 installed per side; 6 spares)
- Thread compatibility: 9/16-20 TPI (standard)
- Standards: Exceeds EN/ISO static & fatigue requirements
- Warranty: 5 years
- Origin: Machined & assembled in Minnesota, USA
- Colors: Gold, Black, Raw Silver, Ultraviolet Purple, Orange, Espresso
- Weight: 382 g (13.4 oz) per pair
- Price: $199.95
3. How The Wolf Tooth Ripsaw Aluminum Pedals Ride
I swapped my old flats for Ripsaw on a mixed-terrain ride.
The first thing I noticed was how low my foot sat.
No more feeling like I’m stepping onto a lunch tray. The arch matched my foot. It felt like a natural extension of my sole.
Smashing roots and rocks, the pins dug into my shoe sole every time.
No slipups when I pedaled out of tight corners. Even when I leaned hard for a berm snap, my foot stayed locked.
On smooth BMX track tarmac, the pedal felt super stable.
The slim edges let my heel slide over without catching on obstacles. Mid-foot pedaling felt smooth.
I could hit the pedals harder without bruising my instep.
Flicking into a bunny hop, I tensed less. The traction kept my foot planted. Actually, because of the amazing grip, doing a bunny hop feels even easier.
The sealed bearings spun freely. Even after a dusty wood-chipped trail, spin rate stayed slick. No gritty drag.
Even when trying to do a few spin tricks and a foot jam tailwhip – no slippage while landing back on the pedals is much easier thanks to the larger platform.
All day long, my feet felt secure and efficient.
These pedals make your legs even more ready to push harder.
GET YOUR WOLF TOOTH COMPONENTS RIPSAW PEDALS NOW4. Real Rider Feedback
Here are thoughts from five riders who put in hours on their Ripsaw pedals:
- Tyler, MTB Racer: “Pedal shape hugs my mid-foot. My shoes don’t twist. I set a PR on my last stage.”
- Jess, Dirt Jumper: “The 7 mm edges let me feather the pedal when catching lip. Grip is on-point but not too harsh.”
- Marco, All-Mountain Guy: “Sealed bearings handled a week in wet PNW logs. Still butter-smooth with zero play.”
- Dana, BMX Track Rider: “At the holeshot bar, I can back-pedal with confidence. Pins bite but don’t shred my suede shoes.”
- Eli, Commuter & Weekend Warrior: “I grind curbs into rail hops. Pins hold. Platform stays straight. No creaks or wiggles.”
5. Potential Cons of the Wolf Tooth Ripsaw Aluminum Pedals
- Pricey: At $200, they sit near the top of flat/platform pedal range. You pay for CNC craft and sealed internals.
- Weight: 382 g per pair. Heavier than some composite-body flats. If grams count, factor that in.
- Pin wear: After hard rock gardens, pins can round off. Wolf Tooth sells spares, but you’ll need a 3 mm hex key and small time.
- Platform feel: Riders who like big, blocky flats may find these too subtle. The thin edges require a mid-foot stance.
6. Who The Wolf Tooth Ripsaw Aluminum Pedals Is Best For
- All-mountain riders who hit tech trails and want flat pedals that won’t catch roots or rails.
- Dirt jumpers who need traction on launch and minimal bulk on landings.
- BMX racers hunting the holeshot: no slipping, fast spin-up and light feel.
- Commuters & urban riders who want durable, low-profile pedals for mixed-terrain city runs.
- Riders with flexible or soft-structured shoes that need extra platform support to avoid sole collapse.
Conclusion: Should You Get The Wolf Tooth Ripsaw Aluminum Pedals?
Every ride is a chance to feel dialed in like never before – and that’s exactly what the Ripsaw pedals deliver.
From the moment your foot meets that slim, curved platform, you’ll sense a connection that turns every pedal stroke into pure confidence.
No more second-guessing grip or fighting bulky edges; these pedals lock your foot in place and let you focus on pushing harder, carving cleaner lines, or charging the next jump.
Think about the trails you’ve left on your bucket list or that BMX track where you’ve always chased one more second.
Now you can hit them with gear that works as hard as you do, day in and day out.
And that five-year warranty isn’t just words. It’s a promise that folks behind the Wolf Tooth Components believe in every CNC-machined detail they ship out.
If you’re ready to upgrade from “good enough” to flat pedals that truly amplifies your ride, it’s time to hit checkout.
Trust me – once you clip onto Ripsaws, you’ll wonder how you ever pedaled without them.
Go on, take that step. Your ride is waiting.
GET YOUR WOLF TOOTH COMPONENTS RIPSAW PEDALS NOWOther bike pedals with a larger platform:
