If you’ve been eyeing a freecoaster hub that’s built to take a beating and still run silky smooth, the Cinema FX2 is what legends are made of.
This is the freecoaster that many heavy-hitters run, like Garrett Reynolds, Chad Kerley, and Nathan Williams, to name a few.
Picture this: a hub so dialed-in that every fakie, every tailwhip, every grind feels like butter.
The CNC’d shell is slim, but it’s tough as nails.
Inside, it’s rocking proven KHE internals and a 9T chromoly driver that snaps into engagement so fast, you’ll swear you’re cheating.
And don’t even get me started on that Dual Threaded Clutch – flip from right-hand to left-hand drive in seconds, no sweat.
Slack? You’re covered.
From tight 55° to wild 180°, you can fine-tune it until it feels perfect under your feet.
And Cinema didn’t skimp on protection.
Nylon hub guards keep your shell and spokes safe when you’re grinding ledges or bumping rails.
At 25 ounces with guards, it’s not the lightest hub, but the strength, the versatility, and the confidence it gives you?
Worth every gram.
If you’re the kind of rider who pushes limits, this hub’s got your back.
Get ready to upgrade your ride with a solid freecoaster hub and hype your sessions up to level eleven.
Cinema FX2 Freecoaster Hub Review
1. Key Features Of The Cinema FX2 Freecoaster Hub
Before we peel back the curtain on what makes the FX2 tick, imagine a BMX hub that’s as eager for the streets as you are.
It’s ready to tackle grinds, pop smooth fakies, and stand up to everything you throw at it.
Let’s break down the standout details that turn this hub into a must-have upgrade if you’re chasing top-tier performance.
- Proven internals: Inside, you’ll find KHE-style internals. These have stood the test of time for reliability.
- 9T dual sealed bearing driver: The 9-tooth chromoly driver features sealed bearings and an additional ceramic bushing. That means smoother engagement and longer life.
- 14mm heat-treated chromoly axle: A solid axle is everything. This one is hollow, heat-treated, and uses a 6mm internal hex. Stubborn bolts? No sweat – maintenance is a breeze.
- Dual Threaded Clutch (DTC) system: Want to switch from right-hand drive (RHD) to left-hand drive (LHD)? Just swap the driver. No more replacing the whole hub.
- Adjustable slack: The slack range goes from 55° up to 180°. It ships at 156° slack, but three included slack washers let you fine-tune it easily.
- CNC machined aluminum shell: The slimmed-down hub shell has canted flanges. This boosts spoke support without adding weight.
- Angled Contact Bearing (ACB): On the drive side, you get a 7905 ACB for better side-load support. That keeps everything stable under grunt.
- Nylon hub guards: Cinema’s CR and DR guards come in the box. They keep your hub and spokes safe from grind damage right away.
2. Cinema FX2 Freecoaster Hub Specifications
Numbers don’t lie, and these details are what craft the FX2 into such a beast.
- Axle: 14mm hollow chromoly
- Axle nuts: 17mm chromoly
- Shell material: 6061-T6 aluminum
- Driver: 1-piece chromoly, 9T
- Driver bearings: Two 7802-14 bearings paired with a ceramic bushing
- Drive side: Switchable between RHD and LHD using the DTC system
- Clutch type: Dual Threaded Clutch (DTC)
- Cones: Threaded on both drive and non-drive sides
- Driver spring: Included in axle
- Hub shell bearings: 6002 on non-drive side, 7905 ACB on drive side
- Slack adjustments: 55°–180° (ships at 156°)
- Drive side flange diameter: 58mm
- Non-drive side flange diameter: 45mm
- Drive side flange offset: 26mm
- Non-drive side flange offset: 30mm
- Spoke hole diameter: 2.6mm
- Guards: Compatible with Cinema’s CR and DR nylon guards
- Hardware: Alloy non-drive side guard, steel drive side guard
- Colors: Black, Polished
- Weight: 25.3 oz (hub only), 717.2 g with guards
- Price: $199.99
3. How The Cinema FX2 Freecoaster Hub Rides
Right out of the box, the FX2 freecoaster spins smoothly.
Just what you’d expect from a pro-level hub.
Engagement is instant thanks to the 9T driver and sealed bearings.
I noticed less play compared to my old hub, even before tweaking slack.
Once I set the slack to my sweet spot (around 160°), tailwhips and fakie tricks felt natural.
Grinding on ledges?
The nylon hub guards held up great. No more crunchy sounds or bent spokes. (Especially when paired with plastic BMX pegs!)
Plus, the canted flanges kept my wheel true. I’ve slammed plenty of fakies, and the ACB on the drive side absorbs side-loads like a champ.
Switching drive sides took no time at all.
So. Convenient.
I popped off the driver, flipped it, and reinstalled.
No fiddling with springs or worrying about clutch rings. This DTC feature is a huge win.
Durability is solid.
After weeks of riding street and park, the internals show no wear at all. And the heat-treated chromoly axle hasn’t bent or creaked AT ALL.
If you ride hard, this hub keeps up.
Some of the pros who ride the Cinema FX2 freecoaster hub: Garrett Reynolds, Nathan Williams, Chad Kerley.
GET YOUR CINEMA FX2 FREECOASTER HUB NOWIf looking for a complete freecoaster wheel, you can get this hub in the following sets:
4. Real Rider Feedback
- Smooth as butter: Jake from Denver said his tailwhips felt snappier compared to his old hub. He noticed no play and instant engagement when he tweaked slack.
- Guard durability: Maya in LA ripped ledges and parks nonstop. Her guards took a beating, and she’s not bent a single spoke yet.
- Easy driver swap: Mark from NYC tried switching to LHD and back in a snap. No extra tools or parts needed, and he was pulling fakie lines in no time.
- Minor complaints: A few riders mentioned the polished finish scratches easy. If you ride rough, go with the black color or expect some character development.
5. Potential Cons of the Cinema FX2 Freecoaster Hub
- Price point: At $199.99, it’s not cheap. But you’re paying for DTC, quality bearings, and a sturdy axle.
- Weight: Coming in around 25.3 ounces with guards, it’s slightly heavier than other some other freecoaster hubs. If you’re chasing grams, this might not be your pick.
- Slack Tweaking: The slack washers work well, but dialing in exact angles can be fiddly until you get used to it.
6. Who The Cinema FX2 Freecoaster Hub Is Best For
- Street riders: If you love grinding ledges and want reliable hub guards for tech fakie combos, this is a top pick.
- Park Riders: Need consistent engagement and minimal slack play? The sealed bearings and ACB have you covered.
- Switch Riders: Anyone who flips between RHD and LHD setups will appreciate the DTC system.
- Intermediate to advanced: Beginners can use it, but at this price, it’s ideal for riders who already know they want a freecoaster hub that lasts.
- Durability seekers: If you break hubs or bend axles easily, the heat-treated chromoly axle and robust internals mean fewer worries.
Conclusion: Is The Cinema FX2 Freecoaster Hub Worth It?
Listen, you’re not just buying a hub.
You’re upgrading your entire ride experience.
The FX2 is a tool that lets you push harder, spin faster, and grind longer without worrying about failure.
When you flip that Dual Threaded Clutch in seconds, dial your slack exactly where it feels right, and notice how smooth every engagement is, you know you’ve made the right call.
This hub gives you confidence to hit trick after trick, confidence that your wheel will hold up when you slam rails, and confidence that you can swap from right-hand to left-hand drive in a heartbeat.
Sure, it costs a little more than a basic hub.
But think of it this way: every dollar goes into proven KHE internals, a heat-treated chromoly axle that laughs off hard landings, and a CNC-machined shell that won’t flex when you’re railing a ledge.
You’ll spend more time dialing your lines and less time fussing with creaks, bent spokes, or constant rebuilds.
And those nylon hub guards? They’re ready to protect you from the grind-induced gouges right out of the box.
No extra modifications, no last-minute trips to the shop – just plug in and ride.
So yeah, if you want a hub that does more than just spin – if you want a hub that inspires you to go bigger – grab the Cinema FX2 freecoaster hub.
It’s the one piece of gear that can change how you ride.
Go ahead, make the call. Your next session is waiting.
GET YOUR CINEMA FX2 FREECOASTER HUB NOWAnother excellent freecoaster hub alternative: Odyssey Clutch Pro freecoaster hub.
Unsure whether to ride freecoaster or stick with a cassette? Then check out the epic WeThePeople Hybrid freecoaster hub.
